Determination of Commonly Used Herbicides in Surface Water Using Solid-Phase Extraction and Dual-Column HPLC-DAD

The present study describes the application of different solid-phase extraction techniques for the extraction, separation, and quantitative determination of 10 commonly used herbicides with different chemical structures (chlorsulfuron, diuron, bentazone, linuron, chlorpropham, fenoxoprop-ethyl, MCPA, diclofop-methyl, fluazifop-butyl, trifluraline) in water. Octadecyl (C₁₈) Empore extraction disks, octadecyl (C₁₈), and stryene divinylbenzene (SDB) Bond Elut Env cartridges were compared for solid-phase extraction efficiency. Herbicides were separated and quantified by reversed-phase high performance liquid chromatography with diode-array detection (HPLC-DAD) with simultaneous separation on two columns of differing polarity (C₁₈ and CN) to confirm identification. Analytical separation was performed simultaneously on C₁₈ and CN columns. Reanalysis of the sample extracts on a (cyano) CN column were used to confirm the identity of these compounds. Method optimization and validation parameters were presented in this work. Recoveries varied from 76.0% to 99.0% for C₁₈ disks, from 75.1% to 100.0% for C₁₈ cartridges, and from 54.0% to 98.0% for SDB cartridges over concentrations at 0.025–0.4 μg L^?1. The limits of detection were 0.012–0.035 μg L^?1.     

恶臭气体环境污染损害评估方法初探

依据环境保护部《关于开展环境污染损害鉴定评估工作的若干意见》(环发[2011]60号)及附件《环境污染损害数额计算推荐方法(第I版)》和《突发环境事件污染损害评估工作暂行办法》(征求意见稿),以日照市某公司恶臭气体污染事故为例,按照污染事故损害评估技术路线,通过现场调查和实验室监测分析主要污染物,从人身损害、应急处置、调查评估以及污染修复等方面的损害评估进行了初步探索。     

双柱双检测器气相色谱法同时进样分析非甲烷烃

介绍了用双柱双氢火焰离子化检测器同时进样气相色谱法分析气体样品中非甲烷烃.经过与现有方法的比较,该方法具有平行性更好、数据更准确、分析速度快等优点,各项指标均大大优于现行标准HJ/T 38-1999中的数据.通过软硬件的改进,解决了以前非甲烷烃在分析中由于在时间上所引起的数据倒置、分析误差等问题.     

在役钢筋混凝土拱桥病害分析和力学性能研究

结合某在役三跨钢筋混凝土拱桥结构的现场检测,对该拱桥结构的静、动力力学性能进行了有限元计算。获得了大桥静载下的变形信息和振动特性信息,为大桥的抗震、抗风分析建立了基础;通过验算荷载对布载最不利位置的检验,全面评估大桥的安全状态;通过静载实测的数值与有限元模型数值的对比,研究了拱桥的力学性能,评估分析了拱桥结构过早出现病害的主要原因,为在役拱桥的安全性评价和健康诊断提供了理论依据。     

农户沼肥还田决策行为及其经济效应评价

论文基于江苏省淮安市和连云港市沼气池使用户调查数据,运用Probit模型考察农户沼肥还田决策行为的影响因素,构建产出供给方程评价农户沼肥还田决策行为的经济效应。结果表明：沼气池使用天数越多、户主年龄越小、户主是村干部或农民专业合作社成员以及人均承包地越多的农户,越倾向于选择沼肥还田,而家庭总资产较少或较多的农户都不愿意选择沼肥还田。控制其他条件,农户沼肥还田可能性每增加1%,单位面积农地产值提高0.07%（10.81 元/hm²）,若研究区域沼气池使用户全部选择沼肥还田,单位面积农地产值将提高356.55元/hm²,具有一定的经济效应,倾向得分匹配方法（PSM）的稳健性分析进一步证实这一结论。目前中国沼肥还田率总体不高且没有规范的沼肥还田管理项目,进而提出鼓励沼气池使用户充分利用沼气池,提高农户沼肥还田积极性的政策建议。     

Two leaks detection in viscoelastic pipeline systems by means of transient

This paper presents a technique for detecting and locating leaks in a single viscoelastic pipe, by means of transient analysis. The system studied is a reservoir-pipe-valve structure. The viscoelastic behavior of the pipe wall material is modeled by a generalized KelvinVoigt model. To determine the leak location, the mathematical formulation has been solved by the method of characteristics. The approach by the method of characteristics is often chosen because it is based on the concept of acoustic wave propagation which is the main mechanism of all transient events considered. The presence of the two leaks in a pipe partially reflects pressure waves initiated by the sudden closure of a downstream shut-off valve. These waves affect the shape and the amplitude of the time-history-pressure. The computed results describe the influence of the presence of two leaks on pressure time-history and the effect of leaks locations and sizes on the pressure signal behavior. The effect of the pipe wall viscoelasticity on the two leaks detection and sizing is also discussed. The leaks discharges are determined by resolving two independent equations derived from literatures and based on transient analysis. The friction and leaks depths effects on two leaks locations and sizing are involved.     

南通市某钢丝绳行业集中区降尘中重金属污染状况评价

针对南通市钢丝绳行业集中区重金属污染问题,分析降尘中的铅、镉、铬、铜、镍、铁、锌、锰等重金属含量,并采用污染指数法和地累积指数法对降尘中重金属污染状况进行评价。结果表明,该集中区降尘中重金属污染程度依次为Zn>Pb>Cd>Cu>Fe>Mn>Ni>Cr,铅、锌为主要污染因子,铅、锌污染级别均处于重污染级别。     

Simultaneous adoption of integrated soil fertility management technologies in the Chinyanja Triangle,Southern Africa

Empirical scientific evidence indicates that there is still room for increasing food production by improving land productivity. This study aimed at identifying the key determinants that govern farmers’ decisions to adopt multiple components of integrated soil fertility management (ISFM) in a maize mixed cropping system of the Chinyanja Triangle, Southern Africa. Revealed preferences of ISFM components were collected from 320 randomly selected households and multivariate probit (MVP) model was used to analyse the simultaneous effects on adoption based on biophysical plot and household‐level socioeconomic attributes. The results show that farmers’ choices of a set of ISFM components are determined by a mix of factors that address the trade‐offs and synergies among them. Non‐farm income, moderate land quality perception, and education influence simultaneous technology adoption, while gender and crop loss increase the likelihood of farmers’ decisions to adopt independent options. Having other sources of income supports co‐adoption of inorganic fertilizer, residue incorporation, and crop rotation. Input/output market access, access to information, financial sources, and climate variability also play pivotal role in technology adoption. These results indicate that resource availability, learning costs, finances, and risk aversion need to be considered when designing and promoting ISFM technologies as a package.     

钢结构栓接板面抗滑移系数试验新法

此文详细介绍了一种钢结构栓接板面抗滑移系数试验的新方法,该方法简便、实用.     

联合上限法和主应力法确定模具表面压力分布的研究(Ⅰ)

提出了一种联合上限法(Upper Bound Method)和主应力法(Slab Method)确定模具与金属接触表面压力分布的方法.这是一种基于利用上限法确定金属流动和变形区,然后根据主应力法原理计算接触面压力分布的方法,简称UBM/SM联合法.这种方法较其它方法简便,而且能给出计算压力分布的解析式.本文阐述该法的基本原理,并用它计算杯形件反挤时凸凹模表面的压力分布.